In inventor split command use to split part faces, trims and removes a section of the part, or splits the part into multiple bodies. The method option specifies split face, trim solid, or split solid. Draft applies to faces on both sides of the split. The split tool can be sketch geometry, surfaces, or work […]
Inventor modeling tutorials
Inventor thicken offset command tutorial
In inventor thicken offset command use to add or removes thickness to faces of a part or a quilt. Create an offset surface from a part face or surface, or a new solid.
How to design sphere spring in Autodesk inventor?
In this tutorial, I will guide how to design sphere spring in Autodesk inventor. To design it we will use helical curve, sweep and revolve command.
Inventor combine command tutorial
In inventor combine command use to cut, join, or intersect operation on two or more solid bodies. You can select a base body to indicate the solid being acted upon. Select one or more tool bodies to perform the specified join, cut or intersect operation on the base solid.
Autodesk inventor tutorial design compression spring.
In this post I will guide how to design compress spring in Autodesk inventor by coil command. We will create it by 3 times using coil command. How to design compression spring in Autodesk inventor? From XZ plan, we will draw a sketch as below. Use coil command to create leg of spring. In the […]
Inventor draft command tutorial
In inventor draft command use to apply an angle to the specified faces of a part. The face draft includes faces that are tangent to the specified face. You can specify the pull direction to indicate the direction in which to pull the mold from the part. You can create a draft about one nor […]