• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar

Mechanicaleng blog

siemens nx tutorial & injection molding technology

  • Plastic molding
  • Siemens nx
    • nx modeling
    • nx drafting
    • nx sketching
    • nx assembly
  • Mechanical basic
    • mechanical standard
    • Mechanism video
  • microsoft office
    • microsoft word
    • powerpoint
    • excel tips
  • About me
  • CONTACT ME
Home » Siemens nx » nx modeling » Siemens nx 12 synchronous modeling relate face

Siemens nx 12 synchronous modeling relate face

March 13, 2019 by mechanicaleng blog Leave a Comment

This tutorial, I will explain siemens nx 12 synchronous modeling relate face as make coplanar, make coaxial, make tangent, make symmetric, make parallel and make offset.

Post contents

  • I. Siemens nx 12 synchronous modeling make coplanar.
    • Where do I find it?
    • How to make coplanar?
  • II. Siemens nx 12 synchronous modeling make coaxial.
    • Where do I find it?
    • How to make coaxial?
  • III. Siemens nx 12 synchronous modeling make tangent.
    • Where do I find it?
    • How to make a face tangent to another face?
  • IV. Siemens nx 12 synchronous modeling make symmetric.
    • Where do I find it?
    • How to make a symmetric set of a face?
  • V. Siemens nx 12 synchronous modeling make parallel.
    • Where do I find it?
    • How to make a face parallel to another face?
  • VI. Siemens nx 12 synchronous modeling make offset.
    • Where do I find it?
    • How to create an offset face from another face?

I. Siemens nx 12 synchronous modeling make coplanar.

Make Coplanar command used to move a planar face to be coplanar with another face.

Where do I find it?

make coplanar icon From the menu: Insert -> Synchronous modeling -> relate -> make coplanar.
From the home tab: Synchronous Modeling group -> me gallery -> relate gallery -> make coplanar.

How to make coplanar?

1. From the menu: Insert -> Synchronous modeling -> relate -> make coplanar.
2. In the motion face group, select face is active. In the graphics window, select the face or planar that will transform.
3. In the stationary face group, select face is active. In the graphics window, select the stationary face.
4. Clicks OK to finish this function.

nx synchronous modeling make coplanar

II. Siemens nx 12 synchronous modeling make coaxial.

Make Coaxial command use to modify a cylinder or cone to be coaxial with another cylinder or cone.

Where do I find it?

make coaxial icon From the menu: Insert -> Synchronous modeling -> relate -> make coaxial.
From the home tab: Synchronous Modeling group -> more gallery -> relate gallery -> make Coaxial.

How to make coaxial?

1. From the menu: Insert -> Synchronous modeling -> relate -> make coaxial.
2. In the motion face group, select face is active. In the graphics window, select an axial face that will transform.
3. In the stationary face group, select face is active. In the graphics window, select the stationary face.
4. Clicks OK to finish this function.

nx synchronous modeling make coaxial

III. Siemens nx 12 synchronous modeling make tangent.

Make tangent command used to modify a face to be tangent with another face.

Where do I find it?

make tangent icon From the menu: Insert -> Synchronous modeling -> relate -> make tangent.
From the home tab: Synchronous Modeling group -> more gallery -> relate gallery -> Make Tangent.

How to make a face tangent to another face?

1. From the menu: Insert -> Synchronous modeling -> relate -> make tangent.
2. In the motion face group, select face is active. In the graphics window, select a face to make tangent
with another face or datum plane that will transform.
3. In the stationary face group, select face is active. In the graphics window, select the stationary face.
4. In the through point group, click specify point and specify a point through which the motion face must pass.
5. Click OK to finish this function.

nx synchronous modeling make tangent

IV. Siemens nx 12 synchronous modeling make symmetric.

Make symmetric command use to modify a face to be symmetric with another face.

Where do I find it?

make symmetric icon From the menu: Insert -> Synchronous modeling -> relate -> make symmetric.
From the home tab: Synchronous Modeling group -> more gallery -> relate gallery -> make symmetric.

How to make a symmetric set of a face?

1. From the menu: Insert -> Synchronous modeling -> relate -> make tangent.
2. In the motion face group, select face is active. In the graphics window, select a face to make symmetric with another face.
3. In the symmetry plane group, select plane is active, from the plane list we will select existing plane. In the graphics window, select a plane for the center of symmetry.
4. In the stationary face group, select face is active. In the graphics window, select the stationary face.
5. Click OK to finish this function.

nx synchronous modeling make symmetric
nx synchronous modeling make symmetric

V. Siemens nx 12 synchronous modeling make parallel.

Make parallel command use to modify a planar face to be parallel with another face.

Where do I find it?

make parallel icon From the menu: Insert -> Synchronous modeling -> relate -> make parallel.
From the home tab: Synchronous Modeling group -> more gallery -> relate gallery -> make parallel.

How to make a face parallel to another face?

1. From the menu: Insert -> Synchronous modeling -> relate -> make parallel.
2. In the motion face group, select face is active. In the graphics window, select a face to make a face parallel to another face.
3. In the stationary face group, select face is active. In the graphics window, select the stationary face.
4. In the through point group, click specify point and specify a point through which the motion face must pass.
5. Click OK to finish this function.

nx synchronous modeling make parallel

VI. Siemens nx 12 synchronous modeling make offset.

Make offset command use to modify a face to be offset from another face.

Where do I find it?

make offset icon From the menu: Insert -> Synchronous modeling -> relate -> make offset.
From the home tab: Synchronous Modeling group -> more gallery -> relate gallery -> make offset.

How to create an offset face from another face?

1. From the menu: Insert -> Synchronous modeling -> relate -> make offset.
2. In the motion face group, select face is active. In the graphics window, select a face you want to make offset with another face.
3. In the stationary face group, select face is active. In the graphics window, select the face that use to measure of offset distance.
4. Type distance value in the distance box.
5. Click OK to finish this command.

nx synchronous modeling make offset
nx synchronous modeling make offset

Related posts:

Nx tutorial synchronous move face select faces to movenx tutorial synchronous modeling modify face Nx synchronous modeling reuse pattern facenx synchronous modeling reuse siemens nx synchronous modeling delete faceSiemens nx synchronous modeling delete face siemens nx surface offset faceSiemens nx how to use offset surface command

Filed Under: nx modeling Tagged With: nx synchronous modeling

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Recent Posts

  • what is spur gear | introduction
  • Mechanical engineering skills from training process
  • What is Inox | Stainless Steel?
  • How to create thread in nx
  • nx assembly| create a new part from the same part
  • how to calculate sum of squares in Excel
  • How to active GC toolkits in Siemens NX
  • How to create a sphere in nx
  • How to create a cone in nx
  • How to create a cylinder in nx

Copyright © 2023 · Magazine Pro on Genesis Framework · WordPress · Log in