In inventor loft command use to create a transitional shape between two or more sketched. Select a series of profiles to define the shape. You can select rails or a center line to refine the shape further. Point mapping prevents twisting. You can use loft to create new bodies.
Inventor sweep command tutorial
inventor sweep command use to sweep one or more sketch profiles along a selected path to create a feature or body. If you sweep multiple profiles, they must exist in the same sketch. The path is an open or closed loop, but must pierce the profile plane Where do I find it? From ribbon bar: […]
Autodesk inventor revolve tool tutorial
Autodesk inventor revolve tool use to create a feature or body by revolving one or more sketched profiles about an axis. You can revolve profile through any angle up to 360 degrees. The axis of revolution can by part of the profile or offset from it. The profile and axis must be co planar. Where […]
Inventor tutorial. How to create new extruded features
In inventor, extrude command use to create new extruded feature or body by adding depth to a profile. Closed profiles create solids or surfaces. Open profiles create surfaces. With extrude command you can create blocks for parts, extrusions add or remove material from parts or assemblies. Extrusions can create new solid bodies in a multi-body […]
Siemens nx motion joints
Nx motion joints use to define constrained motions between motion bodies in the mechanism. Joint motion is always defined as the motion of the action body (the first link in the joint definition, also called i marker) relative to the base body (the second link, or j marker).
simple planetary gear set how to work and calculate
In this post I will explain simple planetary gear set. How does it work and calculate? A planetary gear set has four main items : sun gear, ring gear, carrier, planetary gears. Sun gear and planetary gears are outer gear assembly. Ring gear and planetary gears are 1. How does simple planetary gear set work? + […]