In the Siemens nx, edge blend command use to round sharp edges between faces. The radius can be constant or variable. This post will show how to create an edge blend with constraint radius, conic edge blend, an edge blend with variable radius, an edge blend with corner setback, and an edge blend with stop short […]
detail feature
siemens nx how to use draft body command
In the siemens nx modeling, draft body command use to add and matches drafts on both sides of a parting surface and automatically fills undercut regions material.
siemens nx modeling how to use draft command
In siemens nx modeling, draft command use to modify faces by changing the angle relative to a draw direction. Draft command is available in the modeling application.
Siemens nx how to use chamfer command
In siemens nx, chamfer command use to chamfer shape edges between faces. Chamfer can add or subtract material. Where do i find it? From menu: Insert -> detail feature -> chamfer. From home tab: Feature group -> chamfer. How to use chamfer command. 1. From home tab: Feature group -> chamfer. 2. Select edges to […]