This post I will summary standard dimension of bolts and nuts, screws in mechanical as wood screws, lag screw, drive screw, hanger bolt, tire bolts, carriage bolt, plow bolt, eye bolt, hook bolt, u bolt, collar screw, wing nut, thumb screw, patch bolt, stove bolts.
You are reading standard dimension of bolts and nuts, screws. You can read all series about mechanical standard at here.
We can download pdf file standard dimension of bolts and nuts, screws as below.
1. Bolting According to ISO and ASME STDs. Standard dimension and shaped of bolts.
2. Lock nuts and Lock washers. Standard dimension and shaped of lock nuts and lock washers.
01-Locknuts (standard series) A01.1- ISO 2982-2 .
02-Lockwashers (with straight inner tab) A02.1-.. ISO 2982-2
03-Locknuts (with loking clip) A03.1-.. ISO 2982-2
3. High Strength Structural Bolting.
01-Hex Bolts with Large Widths Across Flats DIN 6914 – UNI 5712
02-Large Hexagon Nuts DIN 6915 – UNI 5713
03-Chamfered Plain Washers DIN 6916-UNI 5714
04-Square Taper Washers for “I-Sections” DIN 6917 – UNI 5715
05-Square Taper Washers for “Channel-Sections” DIN 6918 – UNI 5716
4. Washers – Tie Plates. Standard dimension and shaped of Washers – Tie Plates.
5. Nuts – All Types. Standard dimension and shaped of nuts.
6. Stud Bolts, Studs, Threaded Rods – All Types. Standard dimension and shaped ofStud Bolts, Studs, Threaded Rods.
7. Jointing and Locking Elements.(Keys, Pins, Retaining Rings, Split pins, etc…)
Leave a Reply